User's Manual

english name and Device Status Messages.
USB PORT: This port is for software upgrades and charge
Pairing Your Bluetooth Car Kit
Prior to using your Bluetooth Car Kit for the first time you must pair it with a Bluetooth enabled
cell phone. The pairing procedure is different between models of cell phone. Please refer to the
user manual of your cell phone for specific details on Bluetooth connectivity.
Turn on the Bluetooth Car Kit, and in“Stand-By-Mode”.
Activate your cell phone’s Bluetooth function. Refer to the cell phone’s User
Guide for instructions on Bluetooth.
Select“HF100”from the list on the cell phone Pair the device。
Enter the Passcode“0000”to confirm the pairing process.
Pairing is now complete, and the Blue LED will be lit and “Paired” and “Connected” will confirm it.
。
NOTE: If the cell phone’s and/or the Bluetooth Car Kit’s Battery weak, you may lose
the Bluetooth connection .Maintain the charge of the batteries to ensure good Bluetooth connectivity.
Answering a Call
When there is an Incoming Call you will hear your cell phone’s Ring Tone through the Bluetooth Car Kit
Speaker, The Caller ID display shows either the number of the calling person or CALL.
Ending a Call
Press the Multi-Function Button once, or END the call via your mobile phone in the normal way.
Rejecting a Call
To reject an incoming call press the Multi-Function Button twice.
The Blue LED is ON or blinking and the Caller ID will show [REJECT].
Voice Dialing
(ONLY WORKS WITH CELL PHONE EQUIPPED WITH VOICE DIALING)
To make a call using the Voice Dialing function Button. The Caller ID shows [VOICE
DIRL].Say the Voice Tag clearly and the call will be made.