User's Manual

． Storing temperate: -20℃～70 ℃
Charging the Bluetooth Car Kit
The Blue tooth Car Kit is powered by a re-chargeable, replaceable li-ion battery. A new Li-ion battery’s
optimum performance is only achieved after two or three complete charge and discharge cycles. A
rechargeable Li-ion battery can be charged and discharge hundreds of times, eventually it will wear out.
When the operating time is noticeably shorter than normal, it is time to buy a new battery.
The Car Kit will produce “Do. .Do” alarm sound when the battery is running low. And “LO” on the LCM will
confirm it.And “Charging” will be displayed on the LCM when charging.
Plug the charger commutator to the USB jark
Plug the other port of the charger to the 12V car ciggarette lighter or the computer USB port
“Charging”on the LCM shows charging
“Finished”on the LCM shows complete charging
Turning Your Bluetooth Car Kit On And Off
；Move the ON/OFF Switch to the left
The device will light up the Caller ID Display, and you will hear a start-up tone
To turn the device OFF, move the ON/OFF Switch to the right.
Operation
Your Bluetooth Car Kit is equipped with the following buttons and functions as shown in the Controls
section of this manual
ON/OF SWITCH: Turns the device ON/OFF. To conserve battery power when not in use, turn the Blue
Tooth Car Kit OFF.
UP & DOWN BUTTON: These buttons access your cell phone’s call received log
EARPIECE---FM EARPIECE: Use this for privacy during a call. Once in use the internal Speaker and
Car Speaker will be muted. Use the ON/OFF switch to turn the earpiece ON for private conversation and
OFF for power saving.
MICROPHONE: The Blue Tooth Car Kit is equipped with an internal Full Duplex System Microphone.
DSP Technology, Noise and Echo suppression system.
CALLER ID: Call ID supports up to 12 digits, Displays both incoming call’s phone number and the