User's Manual

7
9. TECHNICAL DATA
10. TROUBLE SHOOTING
Note: Sensitivity levels and indications:
- Hear everything from your baby. The speaker of the parent unit is continuously on.
- Hear all sounds from soft babbling . If your baby does not make any sound, the speaker
of the parent unit is off.
- The speaker of the parent unit only goes on if the baby makes loud sounds (e.g. crying).
No reception on the
monitor
Audio feedback
(high pitched noise)
Interference or poor
reception
* The power adapters may not be properly connected;
* Confirm that the camera and monitor are ON;
* Camera may be far away from the monitor;
* Camera and monitor may not be properly paired; follow PAIRING instructions;
* Move the monitor close to the camera;
* The camera or monitor may be placed too close to many metal objects;
* Other electronic devices may be interfering with the signal;
* The battery power may be too low;
* The camera and monitor may be placed too closed;
* The volume on the monitor may be set too high;
Frozen Picture on
Screen
* Repower the baby unit (plug out the adapter, then plug it into the
socket again);
* Press the RESET key at the back of parent unit;
2403.5MHz~2475.5MHz
Frequency
Power Adaptor
Parent Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC 1A
Camera Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC 1A
Operation
environment
Up to 1000ft (300m) outdoor (line of sight)
Up to 165ft (50m) indoor
Operating Range
Display
3.2'' Diagonal TFT LCD
Battery (Parent Unit)
Battery Life
Li-ion 3.7V 950mAh (3.515Wh)
Up to 6 hours
RelativeHumidity:15%-85%
Maximum power
< 19dBm
Operation Temperature: +32F~+104F (0℃~40℃)
Battery Charging Temperature: +50F~+104F(10℃~40℃)