User's Manual

5
Note : Camera icon with "*" means it is well registered. You should select and pair with the
camera icon without "*" sign.
8.1 .1 ADD CAMERA
1. Press the MENU key then the menu will pop up;
2. Press the ◀ key or ▶ key until the camera icon is highlighted , then press ▲ key or
▼ key to select your desired camera;
3. Press OK key to enter into sub-menu;
4. Press ▲ key or ▼ key to select ADD CAM then press OK key;
5. When the icon ... displayed on the LCD screen, press the PAIR button on the back of
camera;
6. Once paired, “ ”appears on the LCD screen.
7. If fails, repeat the above steps.
8.1.2 DELETE CAMERA
1. Press the MENU key and the menu will pop up;
2. Press the ◀ key or ▶ key until the camera icon is highlighted , then press ▲ key or
▼ key to select your desired camera;
3. Press OK key, to enter into sub-menu;
4. Press ▲ key or ▼ key to select DEL CAM then press OK key;
5. Press ▼ key to select to delete the camera;
6. Press OK key to confirm the option.
8.2 VOLUME
1. Press the key and the menu bar will pop up.
2. Press the ◀ key or▶ key until is highlighted.
3. Press the ▲ key or ▼ key to select the desired volume level from level 1 ~ 5.
(The default volume level setting is level 2 and level 0 is OFF.)
8.3 TEMPERATURE UNIT SETTING
1. Press the key and the menu will pop up;
2. Press the ◀ key or ▶ key until the temperature icon is highlighted;
3. Press ▲ key or ▼ key to select between ℉ or ℃ ;
4. Press OK key to confirm;
5. Press the key to Exit.
The detected temperature range is 0~50 ℃ .Note:
8.3.1 TEMPERATURE ALARM SETTING
1. Press ▲ / ▼ key to select then for alert setting.
2. Press ▲ / ▼ to select then followed by for confirming alarm on or then
followed by for switching off alarm function.
8.3.2 SET TEMPERATURE HI/LO ALERT LIMITS
1. When is highlighted at Alarm setting then press to enter Hi/Lo limits settings.
2. Press ▲ / ▼ keys to adjust the Hi limit then press to confirm.
3. Then the cursor will jump to Lo limit setting.