User's Manual

. The units do not appear to operate normally or exhibits a distinct change in performance;
. The units have been dropped or the enclosure damaged;
2. WARR ANTY TERM S
We offer one-year warranty from the original purchase date against defects in workmanship
and materials. If you have warranty or support issues, please contact our after-sales service
via email.
3.INSTALLAT ION G UID ELIN ES
* To use your parent unit and camera unit together, you have to establish a radio
link between them, and the range will be affected by environmental conditions.
* Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or
reinforced concrete between the baby and parent unit may block the radio signal.
* The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent
lights or dimmer switches.
* Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth
systems, or microwave ovens, may cause interference with this product, so keep the baby
monitor away at least 5ft (1.5m) from such products, or turn them off if they cause
interferences.
4. PLACEM ENT O F THE BABY M ONITO R
The camera can be placed on the desktop or mounted on the wall. Don't place baby monitor
on soft quiltsor blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor
away from heat sources such as radiators, chimneys, cookers and direct sunlight; Keep the
baby unit away from TV sets, microwave oven and radios. If interference occurs, move the
camera to elsewhere;
*Place the camera within6 feet (2 meters) of the area being monitored for optimum
performance.
5. GETT ING START ED
5.1 TURN ON TH E BABY U NIT:
1. Insert the DC plug of the power adapter into the D C jack in the rear of the Baby Unit;
2. Insert the other end of the power adapter into a suitable electrical outlet;
3. Once the adapter is connected, the power LED will light up;
5.2 TURN ON TH E PA RENT UNIT:
1. Insert the DC plug of the power adapter into the D C jack in the side of the parent Unit;
2.Insert the other end of the power adapter into a suitable electrical outlet;
3. Press and hold the power key 3 seconds on the side of the parent unit;
4.Once parent unit is on, the power LED will light upand the image will display on the LCD