Ver: 1.0 User Manual 2.4GHz Digital Wireless Video Baby Monitor Model: HB6339 The pictures are for reference only, please subject to practicality. www.hellobaby.net.cn service@hellobaby.net.
Thank you for purchasing the HB6339 Baby Monitor. With our baby monitor, you could see and hear your baby sleeping or playing in their room anytime. Please retain your original dated sales receipt for your records. For warranty service of your product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
. The units do not appear to operate normally or exhibits a distinct change in performance; . The units have been dropped or the enclosure damaged; 2. WARRANTY TERMS We offer one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our after-sales service via email. 3.
5.3 INFRARED NIGHT VISION (AUTOMATIC) The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images will be displayed on the m onitor, the optimum image lie in where baby unit is 6ft (2m) away from object. The camera is in night vision mode, the icon will be displayed on the top of screen. 6. PRODUCT OVERVIEW 6.
6. 3 BABY UNIT OVERVIEW: MIC Light sensor Infrared LEDs Lens Speaker Power LED Antenna DC-Jack Pair key Temperature sensor 7. KEY OPERATION 7.1 TURN ON/OFF Press and hold the power key for 3 seconds to turn on / off the parents unit. 7.2 UP ▲ KEY Press once to tilt the camera up by one step. Press and hold to tilt continuously. 7.3 DOWN ▼ KEY Press once to tilt the camera down by one step. Press and hold to tilt continuously. 7.4 LEFT ◀ KEY Press once to pan the camera left by one step.
Note : Camera icon with "*" means it is well registered. You should select and pair with the camera icon without "*" sign. 8.1 .1 ADD CAMERA 1. Press the MENU key then the menu will pop up; 2. Press the ◀ key or ▶ key until the camera icon is highlighted , then press ▲ key or ▼ key to select your desired camera; 3. Press OK key to enter into sub-menu; 4. Press ▲ key or ▼ key to select ADD CAM then press OK key; 5. When the icon ... displayed on the LCD screen, press the PAIR button on the back of camera; 6.
4. Press ▲ / ▼ keys to adjust the Lo limit then press to confirm. To skip the setting edit, press key to exit to last menu level. Note: The High temperature alarm range is 20-40 ℃, and the Low temperature alarm range is 0-19 ℃. The high temperature alarm default setting is 36 ℃, and the low temperature alarm default setting is 8 ℃. When the temperature goes above or below the settings, the temperature icon turns red. It will flash to alert user by audio beeps.
Note: Sensitivity levels and indications: - Hear everything from your baby. The speaker of the parent unit is continuously on. - Hear all sounds from soft babbling . If your baby does not make any sound, the speaker of the parent unit is off. - The speaker of the parent unit only goes on if the baby makes loud sounds (e.g. crying). 9. TECHNICAL DATA Frequency 2403.5MHz~2475.
11. MAINTENANCE * Clean your baby monitor with a slightly damp or anti-static cloth. * Never use cleaning agents or solvents. 12. DISPOSAL GUIDE FOR BATTERY AND PRODUCT * Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit; * Remember to dispose of the product in an environmentally responsible way; * For proper collection and processing of these products, take them to the collection points designated by local authorities.
encouraged to try to correct the interference by one ormore of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device meets the exemption from the routine evaluation limits in section 2.
de 1,6 W / kg en moyenne sur un gramme de tissu. Types d'appareils: la Moniteur a également été testée par rapport à cette limite SAR. Cet appareil a été testé pour des opérations typiques portées sur le corps avec le dos de la Moniteur gardé à 0 mm du corps. Pour maintenir la conformité avec les exigences d'exposition RF d'ISDE, utilisez des accessoires qui maintiennent une distance de séparation de 0 mm entre le corps de l'utilisateur et l'arrière de la Moniteur.
WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. AVERTISSEMENT DANGER D’ÉTRANGLEMENT: Des enfants se sont ÉTRANGLÉS avec des cordons électriques. Garde le cordonélectrique hors de la portée des enfants(à plus de 0.9m/3 pi du lit d’enfant). Ne pas enlever cette étiquette.
