User's Manual
Table Of Contents
- 1.The Basics
- 2.Introduction
- 5.Trouble Shooting
- 6.Accessories
- 7.Specifications
- 8.Electromagnetic Compatibility
- FCC Warnning:
- This device complies with part 15 of the FCC Rules
- (1) This device may not cause harmful interference
- (2) this device must accept any interference recei
- Note: This equipment has been tested and found to
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and
- -Connect the equipment into an outlet on a circuit
- -Consult the dealer or an experienced radio/TV tec
- The device has been evaluated to meet general RF e
2
1. The Basics
This manual contains the instructions necessary to operate the
product safely and in accordance with its function and intended
use. Observance of this manual is a prerequisite for proper
product performance and correct operation and ensures patient
and operator safety. Professionals, non-professionals, and patients
can operate medical device in accordance with the instructions.
1.1 Safety
Get medical attention if you have high fever or prolonged
fever, especially young children. Read carefully and follow
the instructions to ensure accurate temperature
measurement.
Keep out of reach of unsupervised children. Components
may be harmful if swallowed.
This device is designed for oral, rectal, or axillary use only.
Please note that temperature measuring are affected by many
factors, including strong physical activity before the test,
drinking hot or cold drinks, and measurement methods.
Avoid taking temperature for 30 minutes after physical
exercise, bathing, dining, or drinking hot or cold beverages.
Stop using the thermometer if it operates erratically or if
the display malfunctions.
Allow the thermometer to warm naturally to room
temperature before using. Performance may be affected if
operated or stored outside stated temperature and humidity
ranges or if the patient's temperature is below the ambient
(room) temperature.
Please note that the use of this product in high temperature
or humidity may cause inaccurate temperature measurement