User's Manual
Table Of Contents
- 1.The Basics
- 2.Introduction
- 5.Trouble Shooting
- 6.Accessories
- 7.Specifications
- 8.Electromagnetic Compatibility
- FCC Warnning:
- This device complies with part 15 of the FCC Rules
- (1) This device may not cause harmful interference
- (2) this device must accept any interference recei
- Note: This equipment has been tested and found to
- -Reorient or relocate the receiving antenna.
- -Increase the separation between the equipment and
- -Connect the equipment into an outlet on a circuit
- -Consult the dealer or an experienced radio/TV tec
- The device has been evaluated to meet general RF e
12
Note: The data cable is a dedicated cable, please purchase
additionally.
3.7 Time Management
1. The device supports Real-Time Clock function, so the device
Clock will work correctly when the host is powered.
2. Time will be lost after absolute shutdown and then boot up
after absolute shutdown.
3. The host time will become the time stored by the hardware on
the host.
4. Cleaning and Disinfecting
Do not use corrosive detergent to clean the unit.
Clean and disinfect the thermometer before and after each use.
4.1Cleaning Process
Wipe probe with a cloth dipped in a disinfectant solution such as
70% isopropyl (rubbing) alcohol or soap and water. Rinse off
disinfectant residue.
4.2Care and Storage
• Do NOT drop or crush; this device is not shock proof.
• Do NOT dismantle or modify device.
• Do NOT store the device in an extreme environment with direct
sunlight or high temperatures.
• Store the unit in the protective case while not in use.