User's Manual

11
indicator light, data will not be saved, and the voice will prompt
the long drop for 3 seconds.
Note 3: User's finger was detected touching the pulse probe.
Mode switching is not allowed.
3.6 Data storage
1. The host can save a total of 60 sets of data (pulse rate 30 +
temperature 30).
2. During the measurement process, temperature and pulse rate
will be stored in the host machine. Users can export the stored
data through Bluetooth or device interface.
 Steps for data export by Bluetooth method:
It automatically turns on Bluetooth broadcast when the device is
turned on, which supports users to transmit the host data of the
thermometer to mobile devices (mobile phone /iPad) through
Bluetooth communication for viewing and storage.
(1) Name of Bluetooth broadcast: Model + last four SN codes,
such as DT-20T 8888
(2) Bluetooth connection mechanism: when the Bluetooth
function and APP are opened at the same time,APP will
automatically search and display the product model and SN
number. Click the host with the corresponding Bluetooth
broadcast name on APP to automatically connect.
(3) Data transmitted includes: Time information Power
information Pulse rate/Body temperature measurement data
Note :DT-10 and DT-20 are wired without Bluetooth function
 Steps to realize data export:
1) Connect the small-end interface of the data cable to the
charging interface of the thermometer.
2) Connect the other end of the data cable to the USB interface of
the PC .
3) Implemented data export according to the instructions of the
PC.