Specifications

11
1 minute, the device completes data storage.
3) When the test is less than 5 minutes, there is no data to
save, and more than 5 minutes will be saved. When the
continuous measurement time is 168 hours, the
measurement will be ended and the data will be saved.
3.5 Data export function
After the measurement is completed, the data measured in
the device can be transmitted to the mobile equipment for
viewing by Bluetooth.
Steps for data export by Bluetooth:
1) Turn on the Bluetooth function of the mobile equipment
to ensure that the Bluetooth function is turned on.
2) Pairing via Bluetooth, the mobile equipment will get data
form the device.
Precautions:
The device can store up to 10 part measurement data and up to
168h of measurement data. In order to ensure that every data
you collect is able to be viewed smoothly, please export the
data in time after each measurement is completed.
3.6 Charging
This device uses a rechargeable lithium battery charged
by connecting a laptop or a power adapter with charging cable.
Charging specific steps:
1. Place the main connect the charging base through the
charging cable.As shown below.
2. Connect the charging cable to the usb port with 5v output
voltage for charging. After entering the charging state, the
indicator light will turn yellow and steady; when the charging
is completed, the indicator light will turn green and steady.