Specifications

9
3.3 Boo
t
When the device is shipped from the factory, it is completely
inactive by default.The device should be charged to activate
the device before it is used for the first time.
3.4 Measuringprocess
3.4.1 Measurement
methods
1、ECG electrode wearing method:
Remove the packaging of the single-use ECG electrode,
install the ECG electrode on the device through the
electrode buckle, and wear the Dynamic ECG recorder with
the ECG electrode on the chest as shown in the figure.
Figure 2
Chest Strap measurement method:
Attach the main unit to the strap and then wear the Chest
strap with the main unit attached to the precordium (The
marked with the English letter "R" is on the right hand side of
the wearer.) as shown below.