User's Manual
Table Of Contents
B-4
should be less than the
compliance level in each
frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
2450
2
0.3
28
28
5240
0.2
0.3
9
9
5500
5785
Note 1: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.
Guidance and manufacturer’s declaration – electromagnetic
immunity
The model Dynamic ECG recorder is intended for use in the electromagnetic
environment specified below. The customer or the user of The model
Dynamic ECG recorder should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compli
ance
level
Electromagnetic environment –
guidance
Conducted RF
IEC61000-4-6
Radiated RF
IEC61000-4-3
3V
rms
150kHz to
80MHz
10V/m
80MHz to
2.7GHz
N/A
10V/m
Portable and mobile RF communications
equipment should be used no closer to
any part of The model Dynamic ECG
recorder, including cables, than the
recommended separation distance
calculated from the equation applicable
to the frequency of the transmitter.
Recommended separation distance
80MHz to 800MHz
800MHz to 2.7GHz