User's Manual
Table Of Contents
6
4.6 Stop working
Unplug the sensor cable, the countdown on the screen will
begin.
During the countdown, if you plug the sensor cable again, the
record will be resumed.
Notice:
ο If the working time is less than 2 minutes, there will be
no data saved
ο If the device power off during working, the data should
have been saved.
4.7 Screen wake up / change display
During measurement, the screen will go off automatically for
saving power; you can press the side button to wake up the
screen or change display.
4.8 Bluetooth Connection
The device Bluetooth will be enabled automatically after itβs
turned on.
To establish a Bluetooth connection,
1) Power on the device.
2) Make sure the phone Bluetooth is enabled.
3) Run the App.
4) Allow the App to use Bluetooth.
Notice:
ο¬ DO NOT PAIR in the settings of your smartphone.