User's Guide

Bluetooth instructions：
1. Bluetooth activation connection: activated when charging (activation for the first
time or when the phone is replaced), when the charging cable is plugged in to activate
the Bluetooth connection, the mobile phone APP software opens the pairing, the red
and blue LED lights alternately breathe, and the blue light is always on after the
connection is turned off for 3S Means connected
2. Bluetooth adjustment power: between 5-11W, Bluetooth adjustment power, with 1W
as the gear. After adjusting the power level on the mobile phone APP, the LED light
corresponding to the current battery will breathe for 0.5S
3. Charging method: When the TYPE-C line is plugged in, the LED light will indicate
the breathing during the charging process. When the voltage is less than 3.7V, the red
light will indicate the breathing. When the battery voltage is greater than 3.7V, the blue
light will indicate the breathing, and the blue light will always be on when the battery is
fully charged.
4.Storage and Others
Long Time Storage
- Products stored for a long time (more than 3 months) must be placed in a dry and
cool place. Temperature: 20±5℃ Relative humidity: 65±20%RH
- Do not leave it in a high temperature environment for a long time during use, as it will
easily cause the taste of the atomized liquid to change and oil leakage.
When standing upside down, the smokeless oil should be stopped to avoid scorching.
Handling Instructions
Do not leave it in a high temperature environment for a long time during use, as it will
easily cause the taste of the atomized liquid to change and oil leakage.
When the e-liquid visibility is lower than the nozzle level, a second oil injection is
required to avoid scorching;
Due to the limited life of the atomizing core, the product is set to 3 repetitive oiling
times in terms of the number of oil injections. If more than 3 times, oil leakage and
taste deterioration will occur.
Caution: The user is cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.