User's Guide

Specification

Material: Stainless Steel, PCTG semi-transparent oil cup

Size: 20mm*20mm*96mm

Pod Capacity: 3.5ml

Resistance: 1.2+0.1/-0.1Ω

Voltage: 3.2-4.2 V

Battery Capacity: 850mAh

User Guide

Usage and instructions

Refer to (use graphic)

Open the silica gel in the direction indicated by the arrow in Figure 1, and do not

remove the entire silica gel, as shown in Figure 2. Use a syringe or an e-liquid bottle

to align the oil injection hole for oil injection, as shown in Figure 3. It takes 10 seconds

after the e-liquid is filled Cover the silicone to prevent oil leakage, as shown in Figure

PAGE 1
Specification Material: Stainless Steel, PCTG semi-transparent oil cup Size: 20mm*20mm*96mm Pod Capacity: 3.5ml Resistance: 1.2+0.1/-0.1Ω Voltage: 3.2-4.2 V Battery Capacity: 850mAh User Guide Usage and instructions Refer to (use graphic) Open the silica gel in the direction indicated by the arrow in Figure 1, and do not remove the entire silica gel, as shown in Figure 2. Use a syringe or an e-liquid bottle to align the oil injection hole for oil injection, as shown in Figure 3.
PAGE 2
Bluetooth instructions： 1. Bluetooth activation connection: activated when charging (activation for the first time or when the phone is replaced), when the charging cable is plugged in to activate the Bluetooth connection, the mobile phone APP software opens the pairing, the red and blue LED lights alternately breathe, and the blue light is always on after the connection is turned off for 3S Means connected 2. Bluetooth adjustment power: between 5-11W, Bluetooth adjustment power, with 1W as the gear.
PAGE 3
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.