User's Manual

Press the power button on the remote to ensure the soundbar is not in standby mode
Press the input button on the remote to switch between AUX and Bluetooth in case
you're in the wrong mode
Troubleshooting guide:
No power
Check the connection of the AC/DC adaptor between the unit and wall outlet
No sound
Check that the volume control is not at minimum
Check that mute is not set on the remote control
The Remote control is not working
Replace the batteries
Make sure there are no obstacle obscuring the front of the soundbar PROSCAN
The power light is on when power on, but no sound
Intermittent Bluetooth
For the best signal transmission please ensure your PROSCAN soundbar is located 4 meters away
from microwave ovens & Wi-Fi routers as this can interfere with the signal
Specifications:
Speakers: SUB Speaker 3''x2 4Ω 20W+passive speaker 3''x2 two end of speaker 3''x2 4Ω10W
Output sound press: 88dB
Frequency response: 80-20KHz
Remote control system: infrared
Adapter input: AC100V-AC240V 50Hz/60Hz 0.6A Max
Power output: 22V 1.63A
Standby power: <0.5W
Mid speaker : L670xW102xH102mm
Gift box: L1170xW149x153mm
Master carton : L1180xW309x167mm
One satellite speaker:
L183xW102x102mm