Specifications

Product Summarize | VANCH-VH production information
Page 10 of 16
Function
Operations
RFID reader module type, RFID reader
module version.
Output type
Under detect type, move to” output type”
menu, it’s ok to select the data output
type.
“data transmit” type, it need send
detected tag data to PC by USB cable.
The output format please refer” VH-88
development manual” point 1.5.
“Simulate keyboard” mode, it will treat the
device as keyboard, to output the tag
data to the PC cursor. Please refer”
VANCH-VH simulate keyboard
function” manual.
RFID read
Under RFID read mode,
Set as” “Single read tags”, means keep
press” scan” button to read, and without
press, it will stop reading tags.
“Continuous read tags”, means press”
scan” button to read, and press” scan”
again to stop reading tags.
Barcode scan
Under barcode scan mode:
Press” Scan” to scan 1d/2d barcode, the
barcode module will start work and keep 4
seconds. And long press” scan” it can keep
scan barcodes.
Data storage
Long press” F1” could store the detected
tags, the tags quantity show on the screen