User's Manual
Table Of Contents
- The fuselage interface
- I、Use with meeting tablet
- II、Use method of matching display device
- III、Product parameters
- 1.Wireless projector parameters
- 2.Receiving box parameter
- 1.With this card to enjoy the warranty period of fre
- 2.Free replacement period of 7 days from the date of
- 3.Prior to new product information or promotional op
- 4.Product failure caused by the following circumstan
- 5.When the user has any objection to the technical s
- 6.The warranty card shall be valid only after being
7
II、 Use method of matching display device
1) Displays device side connections
The first step is to connect the display device (projector, monitor) to
the receiving box
Plug one end of the HDMI connector into the display device
(projector, monitor) and the other end into the HDMI connector in the
receiving box
FIG. 5 wiring diagram of receiving box and display equipment
Step 2 boot the receiver box
Long press the power on key of the receiving box for 3 seconds to
start the machine. After starting the machine, the power lamp will show
the blue color and the program interface will appear on the screen of the
display device (projector, monitor).
The third step is to pair the receiving box with the display device
Connect the wireless projector to the USB port at the back of the
receiving box and wait for the device to pair automatically. The indicator
light will change from the flashing state to the long-bright state, which
means the pairing is successful.