User's Manual
Table Of Contents
- The fuselage interface
- I、Use with meeting tablet
- II、Use method of matching display device
- III、Product parameters
- 1.Wireless projector parameters
- 2.Receiving box parameter
- 1.With this card to enjoy the warranty period of fre
- 2.Free replacement period of 7 days from the date of
- 3.Prior to new product information or promotional op
- 4.Product failure caused by the following circumstan
- 5.When the user has any objection to the technical s
- 6.The warranty card shall be valid only after being
6
Open the wireless hotspot of the conference tablet and record the
wireless hotspot name and password
Open WIFI on Android device and search for WIFI hotspot ShareAP-
***
(" ShareAP-*** "depends on the hotspot name of the actual device)
Enter the account password of WIFI hotspot, the default password is
12345678
Open the downloaded APP, and the device number will be displayed
at the top of the page, which represents the successful connection.
The main interface will prompt the name of the current login phone.If
not, please click refresh and select the current device name to log in.
b) Apple devices
Support Apple iPhone IOS 8.0 and above, Apple iPad IOS 8.0 and
above
Open the wireless hotspot of the conference tablet and record the
wireless hotspot name and password
Open Apple device WIFI and search WIFI hotspot ShareAP-***
(" ShareAP-*** "depends on the hotspot name of the actual device)
Enter the account password of WIFI hotspot, the default password is
12345678
Select the screen image in the control center of the Apple device
and begin the wireless projection.
* note: when the "four-screen" option is enabled in the EShare software
Settings of the conference tablet, up to four devices can be displayed at
the same time. When there are more than four devices, the later devices
will replace the earliest connected devices.