User's Manual

9
The third step is to pair the receiving box with the display device
Connect the wireless projector to the USB port at the back of the
receiving box and wait for the device to pair automatically. The indicator
light will change from the flashing state to the long-bright state, which
means the pairing is successful.
Figure 7 receiver box pairing
After success, the main interface of the projection screen prompts
that the pairing is successful, then pull out the wireless projector.
If the match is not successful, please contact our after-sales service
for assistance.
Note: the device only needs to be paired once. If there is no change later,
there is no need to re-pair.
2) PC matching
Equipment support Windows 7 system and above and Apple Mac
OSX 10.9 system above.
The first step is to install the driver
When the wireless projector is connected to the PC's USB interface,
it will automatically start the installation driver software and start the
application until the PC pairing is automatically completed.