User's Manual

Part One - How to install the light?
Warning
Smart LED Ceiling Light
1
Set-up is easy and takes only a few minutes by following the instructions.
The smart light can work with both Amazon Alexa and Google Assistant. But the light
after being installed will need to be paired with an app called 'Smart Life' first, and
then the Smart Life app will need to be bound with either Amazon Alexa or Google
Assistant to activate the voice control function.
Therefore, this user guide consists of four parts. Part one and two are fundamental
set-up, while part three and four are alternatives. If you use Amazon Alexa for voice
control, please follow instructions on part one, two and three.
If you use Google Assistant for voice control, please skip part three, follow the
instructions on part one, two and four.
(1) Please check if the light and the parts are intact before installation.
(2) Make sure to cut off power before installation.
(3) Please do not place this light in corrosive conditions.
(4) If there is any damage to the cord, please cut off the power and stop using it
immediately.
(5) Please do not retrofit the light within the warranty period.
(6) To ensure the light works properly, please use the voltage indicated on the
packing.