USER MANUAL Smart Led Ceiling Light
Smart LED Ceiling Light Set-up is easy and takes only a few minutes by following the instructions. The smart light can work with both Amazon Alexa and Google Assistant. But the light after being installed will need to be paired with an app called 'Smart Life' first, and then the Smart Life app will need to be bound with either Amazon Alexa or Google Assistant to activate the voice control function. Therefore, this user guide consists of four parts.
1. Specification NTC01S-RGBCW-US Model Wattage CW:24W RGB:8W Luminous Flux CW:2400 lm Input Voltage AC120-240V Frequency 50/60Hz Color Temperature 2700K-6500K Dimming 1%-100% CRI >80 Beam Angle 120° Working Temperature -20℃~40℃ 2. Dimension Φ300 mm / 11.8 in 33 mm / 1.
3. Components Lamp chassis Screw x 2 Plastic Screw Anchor x 2 PC Lampshade 4. Installation Step 1. Open the lampshade by turning it counterclockwise.
Step 2. There are two screw bits on lamp chassis. Choose two of the bits to make a triangular fixation, drill holes on the ceiling and insert plastic screw anchors into the holes. Step 3. Identify the null wire, live wire signs on the wiring port. Pass your power cord through the hole of ceiling lamp chassis, connect your household wires correspondingly to the signs.
Step 4. Put screws into the screw bits on lamp chassis, and fix the lamp chassis onto the ceiling. Step 5. Put on the lampshade to lamp chassis by turning it clockwise.
5. General Troubleshooting If the lamp is properly installed, but s ll fails to work. Please try following solutions first. (1) Please cut off the power and check whether the power cord of lamp is properly connected with mains supply. (2) If the power cord is correctly connected, please ask a proffessional to check the input voltage or circuit. If the solu ons men oned above do not work, please stop using the lamp immediately and contact professionals or the seller for help. 6.
Part Two - How to pair the light to Smart Life app? Before star ng the paring, please make sure to turn on the Bluetooth and WiFi on your phone, and connect to the Internet. The smart light only supports 2.4GHz WiFi network, not 5.0GHz.Please make sure your working network is 2.4GHz, and your phone is connected to it. lf your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router se ngs,and select the 2.4GHz for connection.
Step C : Add the light to Smart Life App 1. Tap ‘+’ bu on on top right corner to add device, then tap ‘ligh ng ’ to enter next page. 2. WiFi Connec on This smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure your working network is 2.4GHz, and your phone is connected to the required WiFi network. (1) Power on the light with your own switch.
3. Choose your WiFi network,enter your password,and tap the ‘Next’ button. Then give a name to the light and tap the ‘Done’ button.
Step D: Give a name to the light -A simple name is recommended for easier voice recognition with Alexa or Google Assistant. -The name given to the light will be the same for voice control on Alexa or Google Assistant. Step E: The named light will be shown on the app homepage.Now you can control the light (turn on/off,change,colors,adjust brightness ect) with Smart Life on the setting page.
Part Three - How to control the light with Amazon Alexa? Please make sure that your Alexa app is connected to Echo,and both work well under your WiFi network. Step A: Log in your Alexa App,tap top left corner,and tap ‘Skills’. Step B: Type ‘Smart Life’,find ‘Smart Life’ from the search result and tap it to enable the skill.
Step C: Enter your Smart Life App account and password.Tap ‘Link Now’, then tap ‘Authorize’ on the next page to bind Smart Life account to Alexa. Step D: When your Smart Life account is bound to Alexa , tap ‘DISCOVER DEVICES’ to detect the light. Step E: When the named light is paired to Alexa from Smart Life,it will show on the device page(see the ‘smart light’ example).
Step F: Now you can control the light with Alexa App on the setting page. To turn on or off the light,simply tap the bulb icon. Step G: You can also voice control the light with Alexa by giving these commands: “Alexa,turn on ‘device name’”, “Alexa, set ‘device name’ to ‘color’”, “Alexa, set ‘device name’ to ‘number’” . Device name is the one you give to the light .The light is named ‘smart light’ in this user guide . For example , “Alexa, turn on ‘smart light’”,etc.
Part Four - How to control the light with Google Assistant? Step A: Login Google Assistant App ,tap ‘Home Control’ on the left side bar page . Step B: Tap ‘+’ button on the bottom right to enter next page. Step C: Find ‘Smart Life’ from side bar list.
Step D: Enter your Smart Life App account and password to bind Smart Life account to Google Assistant . Step E: You will find the named light shows on the Home Control page.Now you can control the light on Google Assistant App, or voice control it by giving these commands: “ok Google , turn on ‘device name’”, “ok Google , set ‘device name’ to ‘color’” , “ok Google , set ‘device name’ to ‘number’”. Device name is the one you give to the light . The light is named ‘smart light’ in this user guide .
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
