Smart LED Flood Light User Guide Manual Version: UT88875-RGBW / V1.
(QJOLVK Smart LED Flood Light User Guide Before installation, let’s know how the whole thing works. Voice Control Voice Control Step One: Install the smart flood light. Step Two: Fundamental set-up-Connect smart LED flood light to Smart Life App. Step Three & Four: Optional set-up - Connect Smart Life App to Amazon Alexa or Google Assistant. After completing Step Two, you can remote control the light on Smart Life App.
(QJOLVK Part One - How to insall the light? Warning (1) Please check if the light and the parts are intact before installation. (2) Make sure to cut off power before installation. (3) Please do not place this light in corrosive conditions. (4) If there is any damage to the cord, please cut off the power and stop using it immediately. (5) Please do not retrofit the light within the warranty period. (6) To ensure the light works properly, please use the voltage indicated on the packing. 1.
(QJOLVK 2.
(QJOLVK 3. Dimension 3m/10ft 3m/10ft 3m/10ft 3m/10ft 3m/10ft 3m/10ft 12cm/4.7in 10cm/4.0in 3.2cm/1.26in 16cm/6.3in 14cm/5.5in Note: 1. The flood lights and cables can not be extended, Do not cut the cable. 2. Use this product with the provided power adapter only. 3. The power adapter is IP44 grade waterproof, which can not be directly used outdoor. Please connect to a indoor socket, or use a waterproof box. 4. The flood lights are IP66 grade waterproof, which can be used outdoor.
(QJOLVK 4. Installation Scenario 1: Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel. A Note: Maximum mounting height is over 5m. Step B: Aim the bracket at the holes and fix it with two bolts (not included). Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
(QJOLVK Scenario 2: Step A: Attach the ground stick to the Flood light, with the screw provided in the package. A Step B: Tighten the screw with the Hex Key Wrench. Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
(QJOLVK Note: 01 01 Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance. The light source of this Iuminaire is not replaceable. Limitation of Indoor and Outdoor Use (1) This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water. (2) The mounting position of this light should be able to bear at least 10 times as heavy as the light.
(QJOLVK Part Two - How to pair the light to Smart Life app? Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone. The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure the working network is 2.4GHz, and your phone is connected to it. If your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection.
(QJOLVK Step C : Add the light to Smart Life App 1. Tap ‘+’ button on top right corner to add devices. Tap ‘Lighting’, then choose ‘PIR Light (BLE+Wi-Fi)’ to add the lights. 2. Power on the light with your own switch. Repeatedly turn on-off-on-off -on-off-on switch (3 times) to activate the light into rapid blinking status (about 0.5s per blink). Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click the ‘Next’ button on this page.
(QJOLVK 3. Choose your WiFi network, enter your password, and tap the ‘Next’ button. Then give a name to the light and tap the ‘Done’ button.
(QJOLVK Step D : Give a name to the light. - A simple name is recommended for easier voice recognition with Alexa or Google Assistant. - The name given to the light will be the same for voice control on Alexa or Google Assistant. Step E : Control the lights. The named light will be shown on the app homepage. Now you can control the light (turn on/off, change colors, adjust brightness ect) with Smart Life on the setting page.
(QJOLVK Tips: ① This botton sets the number of flood lights, please click and set to ‘ 6 ’ . ② Click the ‘ ’ botton, and select the color in the color plate, the color of all the flood lights will be changed at the same time. ③ Click the ‘ ’ botton, select the color in the color plate, and select the flood light you want, the color will be changed separately. ④ Click the ‘ ’ botton, and select the flood light, the flood light will be turn off separately.
(QJOLVK How to group the lights? Make sure all the lights have been paired to “smart life” app, then group the lights by following these steps. 1. Choose any light on the app, click the edit button on the top right corner, then click “Create Group” . 2. Choose the lights you want to group from the device list and rename the group. Now you can control the lights and sync with the music, the colors will be synchronized in the group.
(QJOLVK Part Three — How to control the light with Amazon Alexa? Please make sure that your Alexa app is connected to Echo, and both work well under your WiFi network. Step A: Log in your Alexa App, tap top left corner, and tap ‘Skills’. Step B : Type ‘Smart Life’, find ‘Smart Life’ from the search result and tap it to enable the skill.
(QJOLVK Step C: Enter your Smart Life App account and password. Tap ‘Link Now’, then tap ‘Authorize’ on the next page to bind Smart Life account to Alexa. Step D : When your Smart Life account is bound to Alexa, tap ‘DISCOVER DEVICES’ to detect the light. Step C Step D Same account and password as Smart Life App Step E : When the named light is paired to Alexa from Smart Life, it will show on the device page (see the ‘smart light’ example).
(QJOLVK Step F: Now you can control the light with Alexa App on the setting page. To turn on or off the light, simply tap the bulb icon. Step G: You can also voice control the light with Alexa by giving these commands: “Alexa, turn on ‘device name’”,“Alexa, set ‘device name’ to ‘color’”, “Alexa, set ‘device name’ to ‘number’”. Device name is the one you give to the light. The light is named ‘smart light’ in this user guide.
(QJOLVK Part Four — How to control the light with Google Assistant? Step A: Login Google Assistant App, tap ‘Home Control’ on the left side bar page. Step B : Tap ‘+’ button on the bottom right to enter next page. Step C: Find ‘Smart Life’ from side bar list.
(QJOLVK Step D: Enter your Smart Life App account and password to bind Smart Life account to Google Assistant. Step E : You will find the named light shows on the Home Control page. Now you can control the light on Google Assistant App, or voice control it by giving these commands: “ok Google, turn on ‘device name’”, “ ok Google, set ‘device name’ ‘to color’”, “ ok Google, set ‘device name’ to ‘number’”. Device name is the one you give to the light. The light is named ‘smart light’ in this user guide.
(QJOLVK $Q\ FKDQJHV RU PRGLILFDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\ UHVSRQVLEOH IRU FRPSOLDQFH FRXOG YRLG WKH XVHU V DXWKRULW\ WR RSHUDWH WKH HTXLSPHQW 7KLV HTXLSPHQW KDV EHHQ WHVWHG DQG IRXQG WR FRPSO\ ZLWK WKH OLPLWV IRU D &ODVV % GLJLWDO GHYLFH SXUVXDQW WR SDUW RI WKH )&& 5XOHV 7KHVH OLPLWV DUH GHVLJQHG WR SURYLGH UHDVRQDEOH SURWHFWLRQ DJDLQVW KDUPIXO LQWHUIHUHQFH LQ D UHVLGHQWLDO LQVWDOODWLRQ 7KLV HTXLSPHQW JHQHUDWHV XVHV DQG FDQ UDGLDWH UDGLR IUHTXHQF\ HQHUJ\ DQG LI Q
E-manual Step 1: Scan the QR code Step 2: Click EͲŵĂŶƵĂů W & ĮůĞ Step 3: RĞĂĚ ĮůĞ ŽŶůŝŶĞ Žƌ Ěownload Go paper-free, make life easier, and do something good for the environment.
