Smart LED Flood Light User Guide Manual Version: UT88873-RGB / V1.
(QJOLVK Smart LED Flood Light User Guide Before installation, let’s know how the whole thing works. Voice Control Voice Control Step One: Install the smart flood light. Step Two: Fundamental set-up - Connect smart LED flood light to TechLife Pro App. Step Three & Four: Optional set-up - Connect TechLife Pro App to Amazon Alexa or Google Assistant. After completing Step Two, you can remote control the light on TechLife Pro App.
(QJOLVK Part One - How to insall the light? Warning (1) Please check if the light and the parts are intact before installation. (2) Make sure to cut off power before installation. (3) Please do not place this light in corrosive conditions. (4) If there is any damage to the cord, please cut off the power and stop using it immediately. (5) Please do not retrofit the light within the warranty period. (6) To ensure the light works properly, please use the voltage indicated on the packing.
(QJOLVK 2. Components LED light source Heatsink Reflector Lock screw Tempered glass lid Bracket US Plug US: 18AWG 2×0.824mm² Note: Cord - type Y attachment. For type Y attachment: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. 3. Dimension 12cm/4.7in 14cm/5.5in 3.2cm/1.26in Weight: 1lb/0.
(QJOLVK 4. Installation Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel. A Note: Maximum mounting height is over 5m. Step B: Aim the bracket at the holes and fix it with two bolts. Step C: Adjust the lighting direction up or down as per your need and plug in to power the light on.
(QJOLVK Note: 01 01 Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance. The light source of this Iuminaire is not replaceable. Limitation of Indoor and Outdoor Use (1) This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water. (2) The mounting position of this light should be able to bear at least 10 times as heavy as the light.
(QJOLVK Part Two-How to pair the light to TechLife pro app? Before starting the paring, please make sure to turn on the Bluetooth and WiFi on your phone. The smart light only supports 2.4GHz WiFi network, not 5.0GHz. Please make sure the working network is 2.4GHz, and your phone is connected to it. If your WiFi router supports both 2.4GHz and 5.0GHz, please separate the two frequency bands in the router settings, and select the 2.4GHz for connection.
(QJOLVK Step C: Add the lights to TechLife Pro APP 1. Tap the ‘Add device’, and choose ‘Combo mode’ to add the lights. 2. Power on the light with your own switch. Repeatedly turn on-off-on-off -on-off-on switch (3 times) to activate the light into rapid blinking status. Please make sure to keep an interval over 2 seconds between each turn-on and turn-off. Then click ‘Confirm light blinks rapidly’.
(QJOLVK 3. Choose your WiFi network, enter your password, and click ‘Ok’. Ustellar 4. Select the device, and tap the ‘Next’, it will enter the connecting progress. Note: If the network configuration failed, please retry Step C.
(QJOLVK Step D: Control the lights. 1. The light will be shown on the app ‘Home’ page after successfully configured. Now you can control the lights (turn on/off, change color, sync music, set timer etc.) on the control page. Note: It is highly recommended to turn on both WiFi and Bluetooth on your phone when controlling the lights. The app will automatically select the best wireless connection mode for a better user experience. Tape the ‘ ’ button on the sideslip column to see the device list.
(QJOLVK 2.In the device list: ① Click the ‘ ’ button to refresh the device connection status, and the app will automatically select ‘ble’ or ‘wifi’ connection for a better user control experience. ② Click the ‘ ’ to select which device you want to control. ③ Click the ‘ ’ to turn on/off the light. ④ Click the device name to enter the “Device Settings” page, here you can Rename, Share device, Unshare device, RGB Signal Sequence, Factory Reset (delete the device) etc.
(QJOLVK 3.Tap the ‘Rename’ to rename the device, and click ‘Ok’. Note: A simple name is recommended for easier voice recognition with Alexa or Google Assistant.
(QJOLVK Part Three – How to control the light with Amazon Alexa or Google Assistant? Please make sure your Echo or Google device work well under your WiFi network. Tap the app ‘Me’ page, tap the ‘Third party access’, and choose ‘Alexa’ or ‘GoogleAssistant’ for step by step connection instruction.
(QJOLVK Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
E-manual Step 1: Scan the QR code Step 2: Click EͲŵĂŶƵĂů W & ĮůĞ Step 3: RĞĂĚ ĮůĞ ŽŶůŝŶĞ Žƌ Ěownload Go paper-free, make life easier, and do something good for the environment.
