Parts List

SMART BALANCE WHEEL
ELECTRIC
SELF-BALANCING
SCOOTER
CHARGING & MAINTENANCE
When the red indicator LED shows that the battery level inside the device
is low, stop operating the device. Sustained use when the battery is low
will result in the wheels locking, potentially damaging the device
1. Noticeable smell or high temperature coming from the device.
2. Leaking of any material.
If either of the following occurs, immediately stop using the device
Removal and maintenance of the battery should be handled by trained
professionals. If you choose to dispose of a damaged battery, please note
that lithium-Ion batteries cannot legally be thrown out with the trash, but
must be recycled and processed through proper channels. Contact your
local battery recycling center for the procedure
To charge the Electric Balance Scooter, make sure the scooter is turned
off. Insert the charger into the scooter's charging port. There will be no
other lights on but the power LED light. If the power LED light is red, this
indicates that it needs to be charged. If the power LED light is green, this
indicates that the scooter is fully charged and ready to use.When the light
is green, disconnect the charger to conserve battery life.
Do not charge the Electric Balance Scooter if the charger or port is wet
Do not store or charge the Electric Balance Wheel in extreme hot or cold
temperatures. As this will damage the battery and the internal electronics.
Don't throw it away when you don't need or scrap your scooter! It can be
a risk to you and others
Do not store outside!
WARNING- Risk of Fire- No User Serviceable Parts
Prolonged Exposure to UV Rays. Rain and the Elements May Damage
the Enclosure Materials, Store Indoors when Not in Use.
use the only charger Model HLT-118A-2940400U, made by SHENZHEN
HYLETON TECHNOLOGY CO LTD
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will notcommunications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Manufacturer：
Shenzhen Uni-chic Technology Co., Ltd.
Address: Dormitory Building 101, No. 50, Xingqiao Road, Longxin
Community,Longgang District,Shenzhen,Guangdong，China
4
Stored Relative Humidity
Battery Power
Charging Time
Max Range
Charger
Motor
Working Temperature
Wheel Size
Charging Temperature
Range of Rider’s Weight
Weight Range for Best Experience
5%-85%
0 ~ 35°C
-10 ~ 50°C
20~70 KG(44~154LBS)
29.4V/0.4A
20~90 KG(44~200LBS)
4-5 hours
DC24V/2AH
10km
6.5 inch
Dual 160W