Product Specs

11
Shenzhen Trolink Technology Co.,Ltd . www.trolink.cn
The RF trace requires 50Ω single-ended impedance control, and both sides
and the lower layer of the trace must ensure a complete reference ground
plane. The width of RF traces should be consistent,
The length of the trace should be as short as possible, try to use 135° angle
trace or arc trace, and there should be relatively dense grounding hole
shielding around it. On the RF trace
Reserve a π-type matching circuit and place it close to the chip end.
RF wiring accessories try to avoid high-speed signal lines to prevent
crosstalk.