Operation Guide

-
21
-
Troubleshooting Guide
Problem#1: No spray or beep when buttons on transmitter
are pressed.
The receiver has not been activated. The receiver must be
turned on otherwise it won’t work at all.
The receiver has not been matched to your transmitter. Follow
the instructions to match.
Problem#2: The receiver light changes color to indicate low
battery very quickly.
The unit has been left turned on in between training session.
Make sure the receiver is turned off after use.
You are training in very cold weather.
Problem#3: The remote trainer doesn’t have range or the
range is significantly reduced.
Either you or the dog is shielded by metal structures. Operate it
far away from these structures.
The receiver is on backwards. For best range, position the
receiver so that the light face toward the dog’s nose.