Operation Guide

-
14
-
Match a Receive Collar
Step 1: Press and hold “ON/OFF” button. After two “beep”
sounds, release the button, the power of receiver is
on.
Step 2: Take out the transmitter. Press and hold on the
button + button at the same time ,The
Led display is “ P ” . Close to the receive collar
10-20CM , until hearing 5 “beep” sounds from the
receiver then release .
Note: You should match receive collar within 30 seconds after
turning on the receive collar . Otherwise you have to
turn off receive collar then turn it on again to match .
TRAINING GUIDE
Fitting Collar on the Dog