Operation Guide

-
12
-
Special note: The temperature of environment must be higher
than 0
℃
when charging. The ideal charging temperature is
between 10-45
℃
.
Do not charge battery in hot areas. keep far away from fire.
The red LED light is on when charging.
The green LED light is on and the red LED light is off when the
receive collar is full charged.
The receiver’s red LED light will flash one time per second when
the battery is low power. Please recharge the battery immediately.
Insert the Transmitter battery
1. Hold the Remote Transmitter face down. Gently push on the
lower door, slide down and remove the battery cover.
2. Insert 2 pieces of 1.5-Volt alkaline batteries according to the
correct “+” and“-“ polarity.
3.Close the battery cover.
4.Test the transmitter.
Press any one button of transmitter. If the Red led or Green led
flashes, it indicates that inserting transmitter battery correctly.