Operation Guide

- 23 -
Troubleshooting Guide
Problem#1: No spray or beep when a transmitter button
is pressed.
The receiver has not been activated. The receiver must be turned on
otherwise it won’t work at all.
The receiver has not been matched to your transmitter. Follow the
instructions to match.
Problem#2: The beeper of receiver doesn’t make any
sound when the receiver is turned on.
Press dog selection button to choose correct dog ID before pressing
The batteries are dead. Recharge as needed.
Problem#3: The receiver light changes color to indicate
low battery very quickly.
The unit has been left turned on in between training session. Make
sure the receiver is turned off after use.