Operation Guide

- 15 -
collar ) until hearing 5 “beeps” sound from the receiver
then release .
If you want to match the second dog collar , press and
hold on the Dog 2 button .
Note: You should press and hold on Dog 1 button or Dog2 button
within 10 seconds after turn on the unmatched receive
collar . Otherwise you have to turn off receive collar
then turn it on again to match .
Step 3: Test matched Receiver
press Dog1 button one time, if you can see the red led
flash 1time from the matched receive collar then
congratulations, you have matched the first receive collar.
You can also press Beep button1time to test , will hear 1
sound warning beep from the matched receive collar .
TRAINING GUIDE
Fitting Collar on the Dog
Make sure your dog is standing then place the collar strap on the