Operation Guide

-
40
-
so that the light faces toward the dog’s nose.
Radio interference. Wait a short while then try again, or move to
another area.
Problem#6: The receiver can’t receive any signal or
cannot work at all
Check the receiver on/off button, make sure the receiver is turned
on.
Check the receive collar green Led , make sure it flash 1 time of 5
seconds.
Check the transmitter, if it has a low battery, charge transmitter first.
The battery is broken, please contact us and we will send you a
replacement battery. The batteries are specifically designed for this
model.
The charger is broken, please try in your computer.
Cancel the receiver match, then re-match it with the transmitter.