Operation Guide

-
23
-
of 5 seconds . The anti bark mode is on ,the remote control
function is off .The Transmitter can not control the receiver
under anti bark mode
Step 3: Turn the anti bark mode off
Hold and press on the On/Off button of receive collar again
for more than 2 seconds. When the red light is on then
release it at once. The green Led light of receiver will flash
1 times of 5 seconds . The anti bark mode is off ,the remote
control function is on .
Anti bark how to work
1)The collar will issue one beep audio warning when the device
detects the first barking
2) The collar will begin to emit static shock automatically if the
collar continue to detect the barking in 2 seconds. The interval of
emitting static shock is 2 seconds.
3)The collar will return to the original status if it can’t detect the
barking for 5 seconds. It will start to issue warning beep first
4)The collar will stop automatically after emit 8 times of shock
continuously. 2 minutes later, the collar will return to the original
status.