Operation Guide

-
22
-
Your remote trainer has anti bark function. Please follow the below
steps to turn on the Anti bark mode.
Step 1: Choose proper shock level for anti bark
1) Press the “ ” or “ “buttons to select suitable
shock level.
2) Then press “ ” button and confirm the receive collar
receive the signal from Transmitter and emit at least one
shock . The receive collar will keep this shock level for anti
bark when you turn on the anti bark mode at once.
3) If you want to change the anti bark shock level . Please
repeat above 1) and 2) to set new shock level.
4) If you don’t set anti bark level , when you turn on the anti
bark mode ,the shock level will be same as the final
emitting static shock of the receive collar. The vibration is
no relationship with anti bark shock level.
Step 2: Turn the anti bark mode on
Hold and press on the On/Off button of receive collar for
more than 2 seconds. When the Red light is on then release
it at once. The green Led light of receiver will flash 2 times