Operation Guide

-
17
-
If you want to match the 2
nd
dog , press and hold on “2”
button and “ ” button at same time until the digital
numbers on the LCD display starts counting up on the screen.
If you want to match the 3
rd
dog , press and hold on “3”
button and “ ” button at same time until the digital
numbers on the LCD display starts counting up on the screen.
Step 4: Hold the transmitter close to the unmatched receiver 1 to 2
inches away. After hearing 5 “beeps” sound from the
receiver and you see the green LED flashing slow down to
once every 4-5 seconds, you release the button. It should
connect pretty fast.
Step 5: Test matched Receiver
press “ ” button, if you can hear the “beep” sound
from the matched receiver then congratulations, you have