Operation Guide

-
16
-
disconnected from the remote.
(Note: Never open 2 or more unmatched receivers at the same
time.)
Step 2: Take out the transmitter that you want to match to the
receiver. Press and hold on the “ ” button until LCD
display occurs then release, the transmitter is now on.
Step 3: Press and hold the Dog selection button and “ ” button
at the same. Not to release the two buttons.
If you want to match the 1
st
dog , press and hold on “1”
button and “ ” button at same time until the digital
numbers on the LCD display starts counting up on the
screen. The numbers will be counting up e.g. “08, 09, 10,
11……99”, increasing automatically, this is correct.