Operation Guide

-
15
-
6.If the green light goes from flickering fast, to flickering
once every 4-5 seconds, it is now connected, you just need
to take it out of connection mode.
7.The receiver is still waterproof without the rubber
stopper in place. This does not affect performance. If the
receiver is submarine for more than 2 hours , please take
it out and clean the water of Microphone hole.
8.You may remove the receiver and attach it to a collar
that you prefer to use instead that fits.
Setting Up Multi-Dog System
1. Match a Receiver Collar To add a receiver collar to your remote
dog training system, following the below steps. Only turn on 1
collar at a time to connect.
Step 1: Take out 1 unmatched receiver collar. Press and hold
“ON/OFF” button. After two “beep” sounds, release the
button, the receiver power is on. Green LED light
should be flashing frequently. This means the collar is