Operation Guide

-
14
-
Key Points to note
1.Always charge before use. Ideal time to charge is 2-3
hours for the receiver as this is better for the life of the
battery.
2.The on/off buttons need to be held down for several
seconds to turn the units on and off
3.When the green LED light flash 1 time of 5 seconds.
The remote function is on , the anti bark function is off .
When the green LED light flash 2 times of 5 seconds, the
remote function is off, the anti bark function is on .
4.Only use the receiver for 8 in every 24 hours and adjust
the collar every 1-2 hours if possible to make sure it is
correctly placed and not causing irritation.
5.If the receiver won’t connect to a specific number on
the remote, try a different number as this does sometimes
happen.