Operation Guide

-
11
-
the button. Will stop automatically once you get past 8 seconds of
holding the button.
“1, 2, 3”buttons: Dog selection button, default is “1”. Your transmitter
is capable of training up to three dogs with optional receiver collars.
You select” 1 “dog, LCD display dog ID “A XX”. If you want to train 2
dog, press “2” button, LCD will display “BXX”. If you want to train 3
dog, press “3” button again, LCD will display “C XX”. “XX” is for
showing the shock& vibration level from 1-10.
The transmitter has the memory functions to save the suitable shock &
vibration levels for different dogs. 10 levels of shock stimulation, 10
levels of vibration stimulation. One tone.
NOTE: The red LED light will flash when the battery is low on
power. Recharge the battery at once.