Operation Guide

- 17 -
the two buttons.
Step 4: Hold the transmitter next to the receive collar 1 to 2 inches
away. You can listen for the 5 “beep” sounds from the receiver.
The green LED light of the receiver should now be flashing
frequently. Congratulations, you have cancelled the matched
receiver successfully.
If the collar didn’t cancel the match, please repeat the step
3 to step 4 . Try to close to the collar from different
direction and more close.
Charging
The transmitter and receiver charge rapidly in about 2 hours.
The transmitter and receiver collar can be charged at the same time.
Common adapter for transmitter and receiver charging.
To recharge, open the rubber cover first. Plug the adapter contact
pin into the AC power outlet and insert the adapter plug into the
receiver DC Jack.