Operation Guide

-
28
-
or switch to the longer prongs. After all these steps if you are still
having problems email us.
Test Light Instructions
1. Turn the collar receiver on.
2. Hold the test light contacts to the contact points.
3. Press a stimulation button on the remote transmitter.
4. The test light will flash.
5. Turn the collar receiver off.
Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge the battery and
re-test. .
HOW DOGS LEARN
Here are some basic guidelines that cover all your remote trainer
work on obedience commands.
Follow a step-by-step introduction process on each command.
Don’t assume that your dog will understand a remote trainer
correction in connection with a command. The stimulus can confuse
them initially, even if they knows the command.
Don’t introduce remote training with too high of an intensity