Operation Guide

-
16
-
receiver. Press and hold on the “ ” button until LCD
display occurs then release, the transmitter is now on.
Step 3: Press and hold the Dog selection button and “ ” button
at the same time . Not to release the two buttons.
If you want to match the 1
st
dog , press and hold on “A”
button and “ ” button at same time until the digital
numbers on the LCD display starts counting up on the
screen. Then numbers will be counting up e.g. “08, 09, 10,
11……99”, increasing automatically, this is correct.
If you want to match the 2
nd
dog , press and hold on “B”
button and “ ” button at same time until the digital