Operation Guide

-
12
-
Receive Collar
NOTE: CHARGE RECEIVER BEFORE FIRST USE. IF
IT DOESN’T CHARGE CONTACT US IMMEDIATELY
On/Off Button
Press and hold on 4 seconds to turn the collar on. Two confirming tones will
sound and the collar green LED light will flash 1 time per 5 seconds if
connected. The LED will flash fast if disconnected. Press and hold on 4
seconds to turn the collar off. One long tone will sound and the green LED
light will stop flashing and turn off.
Turn the collar off when not in use to conserve battery
Contact Prong
Choose short or long prong to match
the dog’s coat type.
LED Light
Indicate the working
status, low
battery ,charging status.
DC Jack Cover
Open the Rubber Cover
and insert the adaptor
plug into DC Jack to
charge.
High Light LED
For the 1
st
dog , the
high light LED is
White; For the 2
nd
dog ,the high light
LED is Red ;For
the 3
rd
dog ,the
high light LED is
Green