Operation Guide

-
10
-
“ ” and “ “buttons: Press these buttons to adjust the shock
and vibration intensity from levels 1 to 10.
“ ”button: This is the power switch; hold this button for 2seconds
to switch on power, then LCD will display the default “A01”. You may
change Dog ID by pressing the relative buttons. If you want to switch
off the power, hold this button for 2 seconds to switch off power.
“ ”button: No-stimulation warning beep
“ ”button: Vibration stimulation. Press 1 time- vibrate 1 time. Press
and hold on- emit continuous vibration. Will stop vibrating when you let
go of the button. Will stop automatically when you go past 8 seconds of
holding the button.
“ ” button: Continuous static shock for about 8 seconds.