Operation Guide

- 43 -
• Recharge the Remote Trainer or
charge the Receiver Collar if needed.
Problem#7: The Receiver Collar has to
literally be held on the top of Boundary
Wire for it to activate.
• The batteries have may have run down.
Make sure the batteries are well
charged.
• Adjust the Boundary Control Switch
knob clockwise to increase the
Boundary width.
Problem#8: I have an inconsistent signal
for the Receiver Collar.
• Make sure the Fence Transmitter is at
least three feet from large metal objects
or appliances.
• Make sure all Boundary Wire turns are