Operation Guide

- 40 -
Troubleshooting Guide
Problem#1: No stimulation when Remote
Trainer button is pressed.
• The Receiver Collar has not been
activated. Remember that the Receiver
Collar must be turned on before use.
• The Receiver Collar has not been set to
your Remote Trainer. Follow the
instruction above for directions.
• The batteries in either the Receiver
Collar or the Remote Trainer are dead.
Recharge or replace, as needed.
Problem#2: The Beeper on Receiver Collar
doesn’t make any sound when the power
switch is turned on.
• The battery in the Receiver Collar has
run down. Recharge it as needed for
Min 2 hours.