Operation Guide

- 38 -
2) Press and hold on 2 seconds again, the Red
LED light on then release at once . The green
LED will flash 1 time of 5 seconds. The fence
function and remote function are both
on .Now it is
Dual mode .
Battery operating times can vary and are
dependent on usage and estimated as follows:-
Dual Mode: 75-80 Hours
Single Mode 10-12 Days
Charging
Do not charge batteries in hot areas or too
cold areas, keep far away from fire.
The temperature of environment must be
higher than 0℃ when charging. The ideal
charging temperature is between 10-45℃
1. Lift the rubber cover protecting the DC
Charging Jack
.
2.
Connect the corresponding charge
connector to the DC Charging Jack.
3.
Plug the USB Adaptor into a power source.
4.
Charge the Remote Transmitter for 2 hours