Operation Guide

- 33 -
Step 5 : Test matched Receiver
Press Vibration button, Beep button to
test the reaction of receiver collar.
Press stimulation button to test receiver
by Test Light
1．Insert the contact points into the Test
Light.
2．Press a stimulation button on the remote
transmitter.
3．The Test Tight will flash.
4．Turn the collar receiver off.
5．Save the Test Light for future testing.
Note: If the Test Light does not flash, recharge the
battery and re-test.
If you need, you can also put it on the
lowest setting and test on the back of
your hand/arm for confirmation if
you’re still unsure.