Operation Guide

- 30 -
Step 3: Press and hold the Beep button
and Highlight Led button at the
same time, until the LED display is “U” .
Not to release the two buttons.
Step 4
: Hold the transmitter next to the receive
collar 1 to 2 inches away. You can listen
for the 5 “beep” sounds from the
receiver. The green LED light of the
receiver should now be flashing frequently.
Congratulations
, you have cancelled the
matched receiver successfully.
If the collar didn’t cancel the match, please
repeat the step 3 to step 4 . Try to close to
the collar from different direction and
more close.
Now let’s cover how to pair a collar to your
system.