Operation Guide

- 21 -
VI. Install the Boundary Wire:
Installation of the Boundary wire begins with
burying the wire to protect it and prevent
people, animals, or even weather to disrupt the
wire and break your continuous loop.
To start, cut a trench 1-3 inches deep along
your planned boundary. Place the Boundary
Wire into the trench maintaining some slack to
allow it to expand and contract with
temperature variations. Then use a blunt tool
such as a wooden paint stick to push the
Boundary Wire into the trench; all the while
being careful not to damage the Boundary
Wire.
If you decide not to bury the wire, there are
other options for setting your pet area. The
Boundary Wire can be carefully attached to a
chain link fences, spilt rail fences, or even
wooden privacy fences. The Boundary Wire